I CAN REMANUFACTURE OR REBUILD
JUST ABOUT ANY MOTORCYCLE CARBURETORS
YAMAHA / HONDA / KAWASAKI / SUZUKI
I ALSO REBUILD QUAD CARBURETORS
DUE TO A HIGH WORK LOAD DURING THE BUSY SEASON
TURN AROUND TIME CAN BE PUSHED BACK TO 10 TO 14 DAYS. PAYMENT IS DUE AT TIME OF SHIPPING.
THIS WILL SPEED UP THE REBUILD SERVICE PROCESS.
I DONT START A REBUILD UNTIL PAYMENT IS SENT.
PAYMENT AND SHIPPING INSTRUCTIONS ARE ON THE RIGHT SIDE BELOW...
NOW INTRODUCING MY NEW XV535 MIKUNI BS34
A COMPLETE PROFESSIONAL REBUILD OF YOUR XV535 CARBURETORS WHICH INCLUDES THE INSTALLATION OF. NEW JET PLUGS, GASKETS, ORINGS,
BRAND NEW SLIDE PISTONS AND DIAPHRAGMS
CLEANED AND DETAILED... $300.00
LET ME TAKE THE GUESS WORK AND AGGRAVATION OUT OF REBUILDING OR REPAIRING YOUR CARBURETORS.
I PUT MY HEART AND SOUL IN ALL OF MY WORK.
I GET IT RIGHT THE FIRST TIME.
MY WORK IS GUARANTEED.
TURN AROUND TIME IS ABOUT 1 WEEK.
MODIFIED OR FREE FLOWING EXHAUST.
RE-JETTING FOR MODIFICATIONS AVAILABLE.
VIRAGO REBUILD SERVICE / PRICE $250.00
1981-87 HITACHI HSC40 / 88-98 MIKUNI BST40
A COMPLETE TEAR DOWN AND INTERNAL PARTS INSPECTION
CARBURETORS ARE CLEANED IN AN ULTRASONIC CLEANER
RE-ASSEMBLED USING BRAND NEW THROTTLE SHAFT SEALS
NEW GASKETS AND O-RINGS INSTALLED AS NEEDED
ALL SCREWS ARE REPLACED WITH STAINLESS STEEL CAP SCREWS
FUEL LEVELS ARE CHECKED AND ADJUSTED
THE CARBURETORS WILL BE BENCH SYNCHRONIZED
ALL SETTINGS WILL BE SET TO MANUFACTURES SPECIFICATIONS
YOUR CARBURETORS WILL BE READY TO INSTALL AND DO THE FINAL FINE TUNING. TECHNICAL SUPPORT IS AVAILABLE TO HELP WITH ANY ISSUES YOU MIGHT HAVE.
BELOW IS SOME PICTURES OF BEFORE AND AFTER DETAILING
REBUILD SERVICE FOR SECA, MAXIM
AND ALL 4 CARB RACKS IS $350.00
Keep your Classic Yamaha Virago Running REAL GOOD with Our Carburetor Rebuild Service, based in San Ysidro, California 92173. We also have a large Stock of more than 100 sets of 1981-1987 Hitachi HSC-40 Carburetors Both Versions 1 & 2. And 1988- 1998 Mikuni Carburetors
THIS IS CHROME POWDER COAT & CLEAR COAT
COVERS POWDER COATED $20.00
I REBUILD THESE MODELS BELOW AS WELL AS MANY OTHERS
XV500 XV535 XV700 XV750 XV920 XV1000 XV1100
XS400 XS500 XS650 XS750 XS850 XS1100
XJ550 XJ650 XJ750 FJ1200 XVZ1200 XVZ1300
KZ400 KZ440 KZ750 KZ1000
IF YOUR DONT SEE WHAT YOU NEED.
I SERVICE MANY OTHER KINDS OF CARBURETORS
HONDA / KAWASAKI / SUZUKI
CONTACT ME WITH YOUR NEEDS AND I WILL DO MY
VERY BEST TO GIVE YOU THE SERVICE YOU NEED.
I received an XV535 virago as payment for work I performed. The bike sat in the owners garage for many years with only 7500 miles on it. Joe repaired & rebuilt the carbs. The bike started right up after installation. The superb level of service and communication received should be a model for this industry. Thank You!
1983 Kawasaki KZ440 Belt Drive.
As an Auto Mechanic I thought I could get this Old girl back up and running. Cleaned the Carburetors myself several times. It still wasnt running right. I spoke with Joe at ViragoCarb. He Offer to Rebuild the Set for me for a Great Price. I sent my Carbs from Staten Island, NY. And I received them back looking like New.
(Now will they Operate as Well as they Look?)
Installed the carburetors, Hit the Starter and Varoom!!!
Purrs like a Kitten. It runs Smooth through all Throttle ranges.
I dont know what Majic was performed but I know on my next Project Bike I wont attempt to Repair the Carburetors myself.
I will just Send them to ViragoCarb.
Big THANKYOU to ViragoCarb. 86 Virago 1100, sat in garage for 10 years. Pulled the carbs 3 times, bike had a very subtle miss. After talking with Joe, sent the carbs in. Received them back and had them installed in less than a week. Bike runs like a stallion!!!! Wow, what a fun bike. Ran them through a carb sync, just for fun, right on the $$$$$!
Recently I ordered a set of rebuilt carbs for my 86 Virago 700. The carbs arrived in perfect condition two days later as promised. The carbs worked perfectly also as promised. "Dr Virago" is an expert with these carbs and a gentleman to boot. I'm back on the road thanks to him and his talent. Thanks, Joe
SHIPPING ADDRESS AND INSTRUCTIONS LISTED BELOW
VIRAGOCARB LOCATED IN SOUTHERN CALIFORNIA
IS PROVEN TO BE THE #1 IN CUSTOMER SATISFACTION
WITH OVER 400 MOTORCYCLE CARBURETOR REBUILDS AND RESTORATIONS.
FOR QUESTIONS OR PRICING
CALL OR TEXT 619-862-7685
PAYMENT ACCEPTED PAYPAL ONLY
SHIP YOUR CARBURETORS IN A USPS MEDIUM FLAT RATE BOX. COST IS ABOUT $12.00
FOR 4 CARBS ON A RACK USE LARGE FLAT RATE BOX
COST IS ABOUT $18.00
YOU GET THESE BOXES FREE AT THE U.S. POST OFFICE
SHIP TO ADDRESS
511 E SAN YSIDRO BLVD #1544
SAN YSIDRO, CA 92173
WRAP YOUR CARBURETORS IN PLASTIC WRAP
AND THEN PLACE IN A LARGE ZIP LOCK BAG
THIS WILL CONTAIN ANY GAS SMELL THAT MAY SLOW THE SHIPMENT.
SOME RECENT TESTIMONIALS
Joe rebuilt my mikuni carbs for my Virago quickly and the bike runs great, better than it ever has and it ran good before. He was great to work with and the communication was fantastic. He really knows his stuff and takes great pride in his work. Thanks Joe, Mike Hall
knowledgable,great quality service,quick service
I cant say enough about the professionalism, service and quality I had received at Viragoscarb. I had an issue with my carbs that I thought were a total disaster and junk. I spoke with Joe who took the time to explain and answers question regarding my issue with carbs. He suggested I send them to him to see what can be done. Much to my surprise he was able to save them and when I got them back I thought they were brand new. It was a pleasure to work with Joe. I dont know what else to say except great quality and time efficient. I would definitely recommend this service to anybody that is looking for carb work. THANKS JOE FOR ALL YOUR HELP!!!
READ MORE TESTIMONIALS FROM MANY OF MY SATISFIED CUSTOMERS ON THE TESTIMONIAL PAGE FOUND ABOVE.
WE NOW HAVE GLASS BEAD BLASTING AND
POWDER COAT PAINTING AVAILABLE.
SLIDE COVERS CAN BE POLISHED AND CLEAR COATED
TO KEEP FROM RUSTING. OR THEY CAN BE POWDER COATED BLACK, CHROME, GOLD, AND MANY OTHER COLORS.
Ship To Address:
511 E. San Ysidro Blvd #1544
San Ysidro, CA 92173